Forelle - unbekanntes Fundament
-
- Forenuser
- Beiträge: 755
- Registriert: 10.01.2003 12:02
- Ort/Region: Bad Schönborn
Forelle - unbekanntes Fundament
Hi alltogether,
I found this foundation which is unknown for me. Probably anybody here has seen a similar one and can tell me if it is a radar foundation and if yes which radar was placed on it. At every edge there was a kind of iron ring to fix something.
Any help is appreciated.
Regards,
Torsten
I found this foundation which is unknown for me. Probably anybody here has seen a similar one and can tell me if it is a radar foundation and if yes which radar was placed on it. At every edge there was a kind of iron ring to fix something.
Any help is appreciated.
Regards,
Torsten
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Re: unbekanntes Fundament
Hi Torsten,Pettersson hat geschrieben:Hi alltogether,
I found this foundation which is unknown for me. Probably anybody here has seen a similar one and can tell me if it is a radar foundation and if yes which radar was placed on it. At every edge there was a kind of iron ring to fix something.
Any help is appreciated.
Regards,
Torsten
Could you please post a sketch of the entire foundation and measurements of the "blocks".
bregds
SES
-
- Forenuser
- Beiträge: 755
- Registriert: 10.01.2003 12:02
- Ort/Region: Bad Schönborn
Sockel in Funkmessstellung
Hallo zusammen,
also ich habe mal nachgemessen. Der Sockel misst 2,80 x 2,80. Höhe ist ca 40 cm, darunter geht es allerdings etwas schmaler noch tiefer.
Die Befestigung war kein Ring sondern in jeder Ecke war eine Schreibe. Durchmesser dieser Schraube ca. 1cm, Länge ca. 17 cm davon 12 cm mit Gewinde.
In der Mitte des Sockels sind keine Verschraubungen zu finden, auch kein Abdruck im Beton - die Oberfläche ist glatt.
Gruß,
Torsten
also ich habe mal nachgemessen. Der Sockel misst 2,80 x 2,80. Höhe ist ca 40 cm, darunter geht es allerdings etwas schmaler noch tiefer.
Die Befestigung war kein Ring sondern in jeder Ecke war eine Schreibe. Durchmesser dieser Schraube ca. 1cm, Länge ca. 17 cm davon 12 cm mit Gewinde.
In der Mitte des Sockels sind keine Verschraubungen zu finden, auch kein Abdruck im Beton - die Oberfläche ist glatt.
Gruß,
Torsten
-
- Forenuser
- Beiträge: 755
- Registriert: 10.01.2003 12:02
- Ort/Region: Bad Schönborn
Leuchtfeuer
Hallo Mike,
hast du durch Zufall gerade mal ein Foto eines solchen Leuchtfeuers zur Hand ?
Ich habe heute noch weitere Sockel gefunden, werde sie wohl heute abend hereinstellen.
Gruß,
Torsten
hast du durch Zufall gerade mal ein Foto eines solchen Leuchtfeuers zur Hand ?
Ich habe heute noch weitere Sockel gefunden, werde sie wohl heute abend hereinstellen.
Gruß,
Torsten
- MikeG
- Administrator
- Beiträge: 8757
- Registriert: 07.05.2002 14:38
- Ort/Region: Bispingen
- Kontaktdaten:
Hi!
Das Foto, das ich habe, zeigt den Sockel nicht. Ich kenne einen solchen Sockel, der nachweislich diesem Zweck diente, aber aus eigener Anschauung. Leider ist er vorletztes Jahr weggerissen worden.
Wenn Du mir die Koordinaten mal schickst, schaue ich aber gerne, ob das hinkommen könnte - die Liste von 1938 liegt mir vor.
Mike
Das Foto, das ich habe, zeigt den Sockel nicht. Ich kenne einen solchen Sockel, der nachweislich diesem Zweck diente, aber aus eigener Anschauung. Leider ist er vorletztes Jahr weggerissen worden.
Wenn Du mir die Koordinaten mal schickst, schaue ich aber gerne, ob das hinkommen könnte - die Liste von 1938 liegt mir vor.
Mike
-
- Forenuser
- Beiträge: 755
- Registriert: 10.01.2003 12:02
- Ort/Region: Bad Schönborn
Leuchtfeuer
Hi SES,
thanks a lot for the foto. Am I right that there is no foundation on the picture ? Is a concrete foundation needed for a Leuchtfeuer ?
Does the measurement (2,80 x 2,80) fit in your opinion ?
What fits is that there is no contact in the middle of the foundation, only this kind of screw at the four edges. I have a better picture which I will post this evening (or tomorrow evening).
A lot of questions and there are still more to come (this morning I took fotos of some other foundations).
Still missing the second WR but I have witnesses who fotographed it some years ago. There is a new road to be built in this area (a bridge has been built so far) and the road will seperate the found WR from the Rest of the location.
Hopefully none of the farmers around makes a deal with the workers to demolish some of the stuff while building the road.
regards,
Torsten
thanks a lot for the foto. Am I right that there is no foundation on the picture ? Is a concrete foundation needed for a Leuchtfeuer ?
Does the measurement (2,80 x 2,80) fit in your opinion ?
What fits is that there is no contact in the middle of the foundation, only this kind of screw at the four edges. I have a better picture which I will post this evening (or tomorrow evening).
A lot of questions and there are still more to come (this morning I took fotos of some other foundations).
Still missing the second WR but I have witnesses who fotographed it some years ago. There is a new road to be built in this area (a bridge has been built so far) and the road will seperate the found WR from the Rest of the location.
Hopefully none of the farmers around makes a deal with the workers to demolish some of the stuff while building the road.
regards,
Torsten